FG Wilson Regional Training Center

Training Prices, Course Duration and Hours of Operation

Standard training course cost is *$500.00 per person. Each course last approximately four (4) days - Monday - Thursday, from 9:00 AM - 5:00 PM daily. This applies to all courses that are not customized to order. *The price is with a two person minimum and includes lunch and training material - airfare and accommodations are not included. The cost is $1000.00 for one person.

Please click on the following link in order to download our: Product Training Brochure

Custom training courses are offered at the following rates:

*$150.00 /person per day  at our Regional Training Center

*The price is with a two person minimum and includes lunch and training material - airfare and accommodations are not included. The cost is $250.00 per day for one person.

$1000.00 per day at your location - flat rate 

Please contact Alex Cabrices at (954)433-2212, ext. 119 or [email protected] for further details

Technical Training at Regional Training Center 19 OCT 09

We will be conducting a technical training seminar at our Regional Training Center in Miramar on 19 OCT 09. The course will cover FG Wilson Analog & Digital Control Systems, Alternators and Transfer Switches. The course outline will be the following:

Day 1 – FG Wilson Alternators & FG Wilson Control Systems

Day 2 – FG Wilson Control Systems

Day 3 –PowerWizard

Day 4 – Powerwizard & ATI Transfer Switches

 

The cost is $500.00 and the duration is 4 days. A training manual that is yours to keep and daily luch is included in the cost. Please be advised that participants are required to demonstrate a basic level of electrical and/or mechanical knowledge. If interested in attending, please contact Alex Cabrices at [email protected] or (954) 433-2212, ext. 119

Technical Training at Regional Training Center 12 OCT 09

We will be conducting a technical training seminar at our Regional Training Center in Miramar on 12 OCT 09. The course will cover our standard PowerWizard Control System and 1300 & 2X06 Series Electronic Engines. The cost is $500.00 and the duration is 4 days. A training manual that is yours to keep and daily luch is included in the cost. Please be advised that participants are required to demonstrate a basic level of electrical and/or mechanical knowledge. If interested in attending, please contact Alex Cabrices at [email protected] or (954) 433-2212, ext. 119.

Training Seminar 18 May 09

We will be conducting a technical training seminar at our Regional Training Center in Miramar on 18 May 09. The course will cover previous and current generation FG Wilson control systems and transfer switches. The cost is $500.00 and the duration is 3.5 days. Please be advised that participants are required to demonstrate a basic level of electrical knowledge. If interested in attending, please contact Alex Cabrices at [email protected] or (954) 433-2212, ext. 119.

1106 Electronic Engine Training

The long awaited debut of the 1106 electronic engine is finally here:

- 180 - 220 kVA range

- ECM

- External high pressure injection lines

 Anyone interested in knowing more, please contact me: Alex Cabrices [email protected], 954-433-2212, ext.19.

HEUI SYSTEM

The 1300 series electronic engine uses injector units,which are hydraulically actuated and electronically controlled.

 

Come attend our training seminar to find out how this system works and why it offers vastly improved performance over a typical mechanical system.

Training Seminar 19 January 2009

We will be conducting a technical training seminar at our Regional Training Center in Miramar on 19 Jan 09. The course will cover the PowerWizard Control System, 1300 & 2X00 Series Electronic Engines. The cost is $500.00 and the duration is 3.5 days. If interested in attending, please contact Alex Cabrices at

[email protected] or (954) 433‐2212, ext. 19.

 

Training Seminar 10 NOV 08

We will be conducting a technical training seminar at our Regional Training Center in Miramar on 10 Nov 08. The course will cover previous and current generation FG Wilson control systems, transfer switches and alternators. The cost is $500.00 and the duration is 3.5 days. Please be advised that participants are required to demonstrate a basic level of electrical knowledge. If interested in attending, please contact Alex Cabrices at [email protected] or (954) 433-2212, ext. 19.

Entrenamiento en Alternadores

Entrenamiento en Alternadores

Entrenamiento en Alternadores

FG Wilson Alternator Training Tip

FG Wilson Alternator Training Tip

FG Wilson Alternator Training Tip

FG Wilson Training September 8 – September 11, 2008

We will be conducting a four day FG Wilson technical training seminar on the 8^th of September (September 8 – September 11). Please let me know if you are interested in attending (ASAP). The cost is $500.00 per person and the only way to secure a seat is with a payment.

Topics: FG Wilson Control Systems (1001/LCP1, 2001/LCP2, 4001/4001E analog & PowerWizard digital control systems), ATI Transfer Switches & Leroy Somer Alternators

Description:

The course is designed for people who already have a basic knowledge of electrical control systems and reading electrical schematics; however, it is possible to attend the course without having any of the above mentioned  experience.  We will be discussing previous and present generation control systems, both analog and digital. Participants will learn about panel operation, how to read FG Wilson electrical schematics and how to commission & troubleshoot FG Wilson control systems, ATI Transfer switches and Leroy Somer Alternators. The course consists of both classroom and practical instruction. A certificate will be awarded to those who demonstrate the required level of competence.

Entrenamiento Tecnico de FG Wilson entre Agosto 4 al 8 del 2008

Estaremos ofreciendo un entrenamiento tecnico de FG Wilson entre Agosto 4 al 8 del 2008. Dejame saber si tiene interes de particpar. El costo es de USD$ 1,000.00 por persona y la unica forma de asegurar su posicion es con su pago. The precio incluye: entrenamiento, almuerzo y aperitivos. FGW LATCA tendra un instructor de Irlanda del Norte aqui para presentar la clase.

El topico: motores serie 4000, serie 400D y otro serie de motor sera determinado.

Descripcion: El curso ofrece el estudiante la practica (hands-on) de desarmar un motor hasta el bloque y luego completamente armarlo de nuevo. El manual tecnico del motor sera utilizado para calibrar los inyectores, valvulas y tiempo de la planta. Tambien estaremos presentando los nuevos motores serie 400D y otro serie de motor que sera determinado.

FG Wilson Technical Training Seminar August 4th-8th, 2008

We will be conducting a four day FG Wilson technical training seminar August 4th-8^th. Please let me know if you are interested in attending (ASAP). The cost is $1000.00 per person and the only way to secure a seat is with a payment. The price includes the training, training material, lunch and snacks. FGW LATCA will be hosting an instructor from Ireland in order to conduct the training.

Topics: 4000 Series Engine Strip-down, 400D Series Engines and TBD 

Description:

The course will provide thorough “hands on” mechanical experience by performing an engine strip-down, down to the block, and then completely rebuilding it. An engine  workshop manual will be used in order to properly adjust and calibrate the fuel injection system, valves and timing. We will also be discussing the new 400D series engines and another engine model TBD. 

FG Wilson Technical Training Seminar July 7th 2008

We will be conducting a four day FG Wilson technical training seminar on the 7^th of July (July 7 – July 10) 2008. Please let me know if you are interested in attending (ASAP). The cost is $500.00 per person and the only way to secure a seat is with a payment.

Topics: FG Wilson Control Systems (both analog & digital), ATI Transfer Switches & Leroy Somer Alternators

Description:

The course is designed for people who already have a basic knowledge of electrical control systems and reading electrical schematics; however, it is possible to attend the course without having any of the above mentioned  experience.  We will be discussing previous and present generation control systems, both analog and digital. Participants will learn about panel operation, how to read FG Wilson electrical schematics and how to commission & troubleshoot FG Wilson control systems, ATI Transfer switches and Leroy Somer Alternators. The course consists of both classroom and practical instruction. A certificate will be awarded to those who demonstrate the required level of competence.